IDX Sytem Technology CUE-95 91Wh Li-Ion V-Mount Battery
CUE-D95 is IDX’s most economical Li-ion V-Mount battery in the 90-100Wh battery class. With a capacity of 91Wh and a maximum discharge rate of 6.3A/76W, the CUE-D95 is ideal for small to midsize cameras. The CUE-D95 also comes equipped with a built-in D-Tap connector capable of taking a 50W load for powering ancillary accessories.
Bebob V150 V-Mount Li-Ion Battery 14.4V / 147Wh
Drone DJI Inspire 2
The Inspire 2 takes everything that was good about the Inspire 1 and improves it. The image processing system CineCore2.0 has been upgraded to CineCore2.1, recording video at up to 6K in CinemaDNG/RAW and 5.2K in Apple ProRes when used with Zenmuse X7 camera. It goes from 0 to 50 mph (80 kph) in just 5 seconds and hits a maximum speed of 58 mph (94 kph) and has a max descent speed of 9m/s for unheard of speed and agility in an aircraft this size. A dual battery system prolongs the flight time to a maximum of 27 minutes (with an X4S), while self-heating technology allows it to fly even in low temperatures.
Flight Autonomy has been revised and developed specifically for the Inspire 2, providing two directions of obstacle avoidance and sensor redundancy. Increased intelligence adds multiple intelligent flight modes, including Spotlight Pro, giving even single pilots the ability to create complex, dramatic shots. An upgraded video transmission system is now capable of dual signal frequency and dual channel, streaming video from an onboard FPV camera and the main camera simultaneously, for better pilot and camera operator collaboration.
DJI Goggles
The DJI Goggles are designed for first-person viewing (FPV) applications using compatible DJI products. By receiving the video downlink from the wireless transmitter on your DJI aircraft, the Goggles facilitate a truly immersive flying experience. The Goggles feature dual 5" screens. Each screen boasts a 1080p resolution with an 85° field of view. Both 720p60 and 1080p30 video viewing are available, depending on transmission distance, with a low latency rate of only 110 ms.
Zenmuse X7 with Lens Set 16, 24, 35, 50 mm
Taking advantage of new FSI-Cu technology, the X7's sensor features thinner interconnection, allowing light to reach the sensing area via a larger incident angle for increased photo sensitivity. This enables a more compact lens mount to be used on this sensor while maintaining excellent image quality.The flange focal distance of the DL-Mount is less than 17 mm, roughly 1/3 of the size of a PL-Mount.
Venus Optics Laowa 9mm f/2.8 Zero-D Lens – DL Mount
The Laowa 9mm f/2.8 is not a new lens, but now it’s available in the native DL mount that is found on DJI’s X7 cameras. The lens has exactly the same specifications and optical performance as the existing Fuji X, Sony E and Canon EF-M mount versions that were launched in 2018. The lens feature an ultra-wide 113° angle, cover Super35-sized sensor and has close-to-zero distortion.
Profoto Pro-B4 1000 Air Kit
Profoto ProTwin UV 500W
The ProTwin is an amazingly versatile single head with two plugs and two flash tubes. It allows you to connect both plugs to one pack and halve the flash duration or to connect each plug to separate packs to get twice as much power and twice as fast recycling time And when you connect it to a Pro-10 or D4 you get the utmost from your pack.
The ProTwin is as compact and durable as the ProHead Plus. It is compatible with more than 120 Profoto light shaping tools and designed to support the Profoto zoom function. It’s a unique feature that allows you to shape light by simply sliding the reflector back and forth on the head.
CHAUVET DJ Hurricane Haze 1DX Water-Based Haze Machine
Hurricane Haze 1DX creates a light water-based haze to enhance any light show. Easily set the DMX address and stand-alone operation using the digital display. The haze output speed can be adjusted in stand-alone mode using the digital display with no controller required. A built in sensor helps prolong the hazer’s life by stopping the pump automatically when the fluid level is low.
Rosco Vapour Plus Fog Machine
Designed specifically to fill large venues and outdoor spaces, the Vapour Plus produces impressive amounts of fog quickly and efficiently. The sophisticated software driving the Vapour Plus precisely balances the heating and pump cycles to insure you have huge fog when you need it. At 100% output, the Vapour Plus will run for a full 60 seconds before a short re-heating cycle is needed, and the giant output of this machine is capable of consuming more than 7 liters of fluid per hour!
This fogger produces stadium-sized effects, yet is small enough to mount inside box truss and power from a single mains circuit. An innovative, rotating bottle carriage allows the Vapour Plus to be placed in either the traditional horizontal position or in a vertical orientation. This feature, coupled with the massive fog blasts produced by the Vapour Plus, allows the machine to produce cryogenic-type burst effects without the hassle of handling/storing large dewar tanks of C02.
Two control options are standard in the Vapour Plus: A detachable timed remote offers convenient local control of output & operation, and an integrated DMX interface allows programmed fog effects via a lighting desk. For maximum versatility, a Multi-Link feature allows a single Vapour Remote to control up to four Vapour, Vapour Plus, or V-Hazer units that are daisy-chained together via 3-pin XLR.
Profoto ProHead Plus Flash Head
It’s remarkably lightweight and compact in size, but it’s equally as tough and reliable as the Pro packs themselves. The ProHead Plus is compatible with more than 120 Profoto light shaping tools and designed to support the Profoto zoom function. It’s a unique feature that allows you to shape light by simply sliding the reflector back and forth on the head.
Gitzo GM4562 Series 4 Carbon Fiber Monopod
The GM4562 Series 4 Monopod from Gitzo is a 6-section, lightweight carbon fiber support designed to be the most compact and travel friendly monopod within Gitzo's line up. Utilizing Gitzo's patented G-Lock Ultras, the GM4562 has the ability to support up to an impressive 66 lb while weighing just 1.5 lb.
