ARRI True Blue T1
ARRI True Blue represent an unprecedented evolution of the location fixtures that have been popular workhorses for over two decades. Following extensive research and feedback from lighting professionals around the world, combined with advances in technology, ARRI has designed a series of six highly innovative lampheads with over 30 new improvements for studio and location lighting. ARRI True Blue T1 is available in both manual and pole-operated versions.
ARRI Studio T12
ARRI STUDIO Fresnels are an ideal choice for film studios where high performance and high wattage tungsten lampheads are required. The large lenses give great efficiency and an extremely wide beam spread. ARRI's elegant modular construction, using corrosion-free aluminium extrusions and lightweight die castings, offers great structural strength.
ARRI L7-C LE2 LED Fresnel
The ARRI L7-C LE2 shares many characteristics with its predecessor, but the most obvious improvement is a 25% boost in power, increasing the light's tungsten equivalency from 750W to 1000W. This stand/manual mount version has a yoke with a 1-1/8" Junior pin.
The key characteristic of any Fresnel is flood-to-spot capability, and the L7-C LE2 meets and exceeds expectations with an impressive beam angle of 15-50°. There's no learning curve when swapping out L7-C LE2 fixtures for fixtures with standard Fresnels. In fact, you're not going to be moving them around or juggling scrims in high places thanks to the 100 - 0% on-board dimming.
Attributes and Benefits
- L7-C LE2s with Light Engine 2 are 25% brighter than previous versions
- Fully tuneable from 2800 - 10,000K
- Plus/Minusgreen correction
- Vibrant color selection (RGB+W color gamut)
- Hue and saturation control
- High color rendering
- Low power consumption (160W nominal)
- Fully dimmable
- True Fresnel lens light characteristics from LEDs
- Onboard DMX In and Out
- RDM implementation
- USB Mini connection for firmware updates
- Fan mode selection
ARRILITE 2000 Plus
The continuing popularity of the ARRILITE 2000 has inspired ARRI’s lighting team to undertake a complete redesign and update of this traditional, open-faced lamphead. Incorporating a range of innovative features, the new ARRILITE 2000 Plus meets the exacting production demands of today’s film and television industries. By utilizing the ARRIMAX reflector and optical system, light efficiency is increased and light distribution improved.
ARRI Junior 1000 Plus
ARRILITE 750 Plus
The ARRILITE 750 Plus is a new and improved incarnation of ARRI’s traditional, open-faced light, the ARRILITE 800/1000. By optimizing the ARRIMAX reflector for usage with an HPL* 750 W lamp, the ARRILITE 750 Plus offers 21 % higher light efficiency than the previous ARRILITE 800 W, while the ARRIMAX optical system improves distribution of the light. A detachable and fully rotatable accessory holder accommodates scrims and barndoors, and incorporates fittings that permit the Chimera Video Pro Plus S to be fitted directly, without an additional speedring.
ARRI 650 Plus
The ARRI Junior series is ideal for use where compact, lightweight tungsten fresnel spotlights are required, especially in small studios where grid height is a problem. Classic ARRI construction, using corrosion-resistant, extruded, die cast aluminium, maximises body strength while maintaining the light weight of a location fixture. Despite the small size of ARRI Junior lampheads, their short focal length, wide angle lenses produce impressive light output and good light distribution over the full beam area. ARRI Junior lampheads are available in both manual and pole-operated versions.
ARRI 300 Plus
The ARRI Junior series is ideal for use where compact, lightweight tungsten fresnel spotlights are required, especially in small studios where grid height is a problem. Classic ARRI construction, using corrosion-resistant, extruded, die cast aluminium, maximises body strength while maintaining the light weight of a location fixture. Despite the small size of ARRI Junior lampheads, their short focal length, wide angle lenses produce impressive light output and good light distribution over the full beam area. ARRI Junior lampheads are available in both manual and pole-operated versions.
ARRI Junior 150 W
The ARRI Junior series is ideal for use where compact, lightweight tungsten fresnel spotlights are required, especially in small studios where grid height is a problem. Classic ARRI construction, using corrosion-resistant, extruded, die cast aluminium, maximises body strength while maintaining the light weight of a location fixture. Despite the small size of ARRI Junior lampheads, their short focal length, wide angle lenses produce impressive light output and good light distribution over the full beam area. ARRI Junior lampheads are available in both manual and pole-operated versions.
ARRI SkyPanel S360-C
The ARRI SkyPanel has always been known for its tremendous output and large light aperture. The new S360-C has expanded ARRI’s LED soft light range with the largest and brightest SkyPanel to date. Not only is the S360-C powerful, but it is packed full of exciting features, making it one of the most versatile LED fixtures on the market. Features include full color control, lighting effects on a huge aperture, wireless DMX built in, a unique carbon fiber yoke, and much more. The S360-C is truly a beast of a light.
ARRI SkyPanel S120-C
The S120 is twice as long as the S60, but weighs nearly the same. Its larger light aperture makes a great soft light even better. Made in Germany to the high standards for which all ARRI products are known, SkyPanel is built to last – constructed from resilient materials and assembled by hand with great care.
ARRI SkyPanel S60-C
The S60 is a mid-range model, featuring a light aperture of 645 x 300 mm and accommodating the vast majority of applications. Made in Germany to the high standards for which all ARRI products are known, SkyPanel is built to last – constructed from resilient materials and assembled by hand with great care.
